diff options
Diffstat (limited to 'doc/reference.doxygen.in')
| -rw-r--r-- | doc/reference.doxygen.in | 2339 |
1 files changed, 1425 insertions, 914 deletions
diff --git a/doc/reference.doxygen.in b/doc/reference.doxygen.in index 718a74c..bff8a8a 100644 --- a/doc/reference.doxygen.in +++ b/doc/reference.doxygen.in @@ -1,110 +1,121 @@ -# Doxyfile 1.8.1.1 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # -# All text after a hash (#) is considered a comment and will be ignored. +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. # The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" "). +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- # This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See -# http://www.gnu.org/software/libiconv for the list of possible encodings. +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 -# The PROJECT_NAME tag is a single word (or sequence of words) that should -# identify the project. Note that if you do not use Doxywizard you need -# to put quotes around the project name if it contains spaces. +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. PROJECT_NAME = LV2 -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. PROJECT_NUMBER = @LV2_VERSION@ # Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer -# a quick idea about the purpose of the project. Keep the description short. +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. PROJECT_BRIEF = -# With the PROJECT_LOGO tag one can specify an logo or icon that is -# included in the documentation. The maximum height of the logo should not -# exceed 55 pixels and the maximum width should not exceed 200 pixels. -# Doxygen will copy the logo to the output directory. +# With the PROJECT_LOGO tag one can specify an logo or icon that is included in +# the documentation. The maximum height of the logo should not exceed 55 pixels +# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo +# to the output directory. PROJECT_LOGO = -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. OUTPUT_DIRECTORY = @LV2_DOC_DIR@ -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, -# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. OUTPUT_LANGUAGE = English -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. +# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. BRIEF_MEMBER_DESC = YES -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # brief descriptions will be completely suppressed. +# The default value is: YES. REPEAT_BRIEF = YES -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. ABBREVIATE_BRIEF = # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief +# doxygen will generate a detailed section even if there is only a brief # description. +# The default value is: NO. ALWAYS_DETAILED_SEC = NO @@ -112,169 +123,204 @@ ALWAYS_DETAILED_SEC = NO # inherited members of a class in the documentation of that class as if those # members were ordinary class members. Constructors, destructors and assignment # operators of the base classes will not be shown. +# The default value is: NO. INLINE_INHERITED_MEMB = NO -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. +# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. FULL_PATH_NAMES = YES -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. STRIP_FROM_PATH = -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. STRIP_FROM_INC_PATH = -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful if your file system -# doesn't support long names like on DOS, Mac, or CD-ROM. +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. SHORT_NAMES = NO -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments -# (thus requiring an explicit @brief command for a brief description.) +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. JAVADOC_AUTOBRIEF = YES -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring -# an explicit \brief command for a brief description.) +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. QT_AUTOBRIEF = NO -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. MULTILINE_CPP_IS_BRIEF = NO -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. INHERIT_DOCS = YES -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a +# new page for each member. If set to NO, the documentation of a member will be +# part of the file/class/namespace that contains it. +# The default value is: NO. SEPARATE_MEMBER_PAGES = NO -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. TAB_SIZE = 4 -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. ALIASES = # This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding -# "class=itcl::class" will allow you to use the command class in the -# itcl::class meaning. +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. TCL_SUBST = -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. OPTIMIZE_OUTPUT_FOR_C = YES -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for -# Java. For instance, namespaces will be presented as packages, qualified -# scopes will look different, etc. +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. OPTIMIZE_OUTPUT_JAVA = NO # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources only. Doxygen will then generate output that is more tailored for -# Fortran. +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. OPTIMIZE_FOR_FORTRAN = NO # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for -# VHDL. +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make # doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# (default is Fortran), use: inc=Fortran f=C. +# +# Note For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. EXTENSION_MAPPING = -# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all -# comments according to the Markdown format, which allows for more readable +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable # documentation. See http://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you -# can mix doxygen, HTML, and XML commands with Markdown formatting. -# Disable only in case of backward compatibilities issues. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. MARKDOWN_SUPPORT = YES +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also makes the inheritance and collaboration +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration # diagrams that involve STL classes more complete and accurate. +# The default value is: NO. BUILTIN_STL_SUPPORT = NO # If you use Microsoft's C++/CLI language, you should set this option to YES to # enable parsing support. +# The default value is: NO. CPP_CLI_SUPPORT = NO -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public -# instead of private inheritance when no explicit protection keyword is present. +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. IDL_PROPERTY_SUPPORT = YES @@ -282,67 +328,61 @@ IDL_PROPERTY_SUPPORT = YES # tag is set to YES, then doxygen will reuse the documentation of the first # member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. +# The default value is: NO. DISTRIBUTE_GROUP_DOC = NO -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. SUBGROUPING = YES -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and -# unions are shown inside the group in which they are included (e.g. using -# @ingroup) instead of on a separate page (for HTML and Man pages) or -# section (for LaTeX and RTF). +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. INLINE_GROUPED_CLASSES = NO -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. INLINE_SIMPLE_STRUCTS = NO -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum -# is documented as struct, union, or enum with the name of the typedef. So +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So # typedef struct TypeS {} TypeT, will appear in the documentation as a struct # with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code in case the coding convention dictates that all compound +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound # types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. TYPEDEF_HIDES_STRUCT = YES -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. LOOKUP_CACHE_SIZE = 0 @@ -351,309 +391,357 @@ LOOKUP_CACHE_SIZE = 0 #--------------------------------------------------------------------------- # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. EXTRACT_ALL = YES -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will +# be included in the documentation. +# The default value is: NO. EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. EXTRACT_PACKAGE = NO -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. +# If the EXTRACT_STATIC tag is set to YES all static members of a file will be +# included in the documentation. +# The default value is: NO. EXTRACT_STATIC = YES -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. EXTRACT_LOCAL_CLASSES = YES -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. +# This flag is only useful for Objective-C code. When set to YES local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO only methods in the interface are +# included. +# The default value is: NO. EXTRACT_LOCAL_METHODS = NO # If this flag is set to YES, the members of anonymous namespaces will be # extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base -# name of the file that contains the anonymous namespace. By default -# anonymous namespaces are hidden. +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. EXTRACT_ANON_NSPACES = NO -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. HIDE_UNDOC_MEMBERS = NO -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO these classes will be included in the various overviews. This option has +# no effect if EXTRACT_ALL is enabled. +# The default value is: NO. HIDE_UNDOC_CLASSES = NO -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO these declarations will be +# included in the documentation. +# The default value is: NO. HIDE_FRIEND_COMPOUNDS = NO -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. HIDE_IN_BODY_DOCS = NO -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. INTERNAL_DOCS = NO -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows # and Mac users are advised to set this option to NO. +# The default value is: system dependent. CASE_SENSE_NAMES = YES -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES the +# scope will be hidden. +# The default value is: NO. HIDE_SCOPE_NAMES = NO -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. SHOW_INCLUDE_FILES = NO -# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen -# will list include files with double quotes in the documentation -# rather than with sharp brackets. +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. FORCE_LOCAL_INCLUDES = NO -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. INLINE_INFO = YES -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO the members will appear in declaration order. +# The default value is: YES. SORT_MEMBER_DOCS = NO -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. SORT_BRIEF_DOCS = NO -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen -# will sort the (brief and detailed) documentation of class members so that -# constructors and destructors are listed first. If set to NO (the default) -# the constructors will appear in the respective orders defined by -# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. -# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO -# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. SORT_MEMBERS_CTORS_1ST = NO -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the -# hierarchy of group names into alphabetical order. If set to NO (the default) -# the group names will appear in their defined order. +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. SORT_GROUP_NAMES = NO -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. SORT_BY_SCOPE_NAME = YES -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to -# do proper type resolution of all parameters of a function it will reject a -# match between the prototype and the implementation of a member function even -# if there is only one candidate or it is obvious which candidate to choose -# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen -# will still accept a match between prototype and implementation in such cases. +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. STRICT_PROTO_MATCHING = NO -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. +# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the +# todo list. This list is created by putting \todo commands in the +# documentation. +# The default value is: YES. GENERATE_TODOLIST = YES -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. +# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the +# test list. This list is created by putting \test commands in the +# documentation. +# The default value is: YES. GENERATE_TESTLIST = YES -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. +# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. GENERATE_BUGLIST = YES -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. +# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. GENERATE_DEPRECATEDLIST= YES -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if <section_label> ... \endif and \cond <section_label> +# ... \endcond blocks. ENABLED_SECTIONS = -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or macro consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and macros in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. MAX_INITIALIZER_LINES = 30 -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES the list +# will mention the files that were used to generate the documentation. +# The default value is: YES. SHOW_USED_FILES = YES -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. -# This will remove the Files entry from the Quick Index and from the -# Folder Tree View (if specified). The default is YES. +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. SHOW_FILES = YES -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the -# Namespaces page. -# This will remove the Namespaces entry from the Quick Index -# and from the Folder Tree View (if specified). The default is YES. +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. SHOW_NAMESPACES = YES # The FILE_VERSION_FILTER tag can be used to specify a program or script that # doxygen should invoke to get the current version for each file (typically from # the version control system). Doxygen will invoke the program by executing (via -# popen()) the command <command> <input-file>, where <command> is the value of -# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file -# provided by doxygen. Whatever the program writes to standard output -# is used as the file version. See the manual for examples. +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated # output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. -# You can optionally specify a file name after the option, if omitted -# DoxygenLayout.xml will be used as the name of the layout file. +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. LAYOUT_FILE = -# The CITE_BIB_FILES tag can be used to specify one or more bib files -# containing the references data. This must be a list of .bib files. The -# .bib extension is automatically appended if omitted. Using this command -# requires the bibtex tool to be installed. See also -# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style -# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this -# feature you need bibtex and perl available in the search path. +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. Do not use file names with spaces, bibtex cannot handle them. See +# also \cite for info how to create references. CITE_BIB_FILES = #--------------------------------------------------------------------------- -# configuration options related to warning and progress messages +# Configuration options related to warning and progress messages #--------------------------------------------------------------------------- -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. QUIET = YES # The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. +# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. WARNINGS = YES -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. +# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. WARN_IF_UNDOCUMENTED = NO -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. WARN_IF_DOC_ERROR = YES -# The WARN_NO_PARAMDOC option can be enabled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO doxygen will only warn about wrong or incomplete parameter +# documentation, but not about the absence of documentation. +# The default value is: NO. WARN_NO_PARAMDOC = NO -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. WARN_FORMAT = "$file:$line: $text" -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). WARN_LOGFILE = #--------------------------------------------------------------------------- -# configuration options related to the input files +# Configuration options related to the input files #--------------------------------------------------------------------------- -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. +# Note: If this tag is empty the current directory is searched. INPUT = @LV2_SRCDIR@/doc/mainpage.dox \ lv2/lv2plug.in/ns/ext/atom/atom.h \ @@ -681,32 +769,35 @@ INPUT = @LV2_SRCDIR@/doc/mainpage.dox \ lv2/lv2plug.in/ns/lv2core/lv2.h # This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is -# also the default input encoding. Doxygen uses libiconv (or the iconv built -# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for -# the list of possible encodings. +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh -# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py -# *.f90 *.f *.for *.vhd *.vhdl +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank the +# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, +# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, +# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, +# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, +# *.qsf, *.as and *.js. FILE_PATTERNS = -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. RECURSIVE = NO # The EXCLUDE tag can be used to specify files and/or directories that should be # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. +# # Note that relative paths are relative to the directory from which doxygen is # run. @@ -715,14 +806,16 @@ EXCLUDE = # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or # directories that are symbolic links (a Unix file system feature) are excluded # from the input. +# The default value is: NO. EXCLUDE_SYMLINKS = NO # If the value of the INPUT tag contains directories, you can use the # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories -# for example use the pattern */test/* +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* EXCLUDE_PATTERNS = @@ -731,755 +824,1080 @@ EXCLUDE_PATTERNS = # output. The symbol name can be a fully qualified name, a word, or if the # wildcard * is used, a substring. Examples: ANamespace, AClass, # AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* EXCLUDE_SYMBOLS = -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). EXAMPLE_PATH = # If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. EXAMPLE_PATTERNS = # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. EXAMPLE_RECURSIVE = NO -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). IMAGE_PATH = # The INPUT_FILTER tag can be used to specify a program that doxygen should # invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command <filter> <input-file>, where <filter> -# is the value of the INPUT_FILTER tag, and <input-file> is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# by executing (via popen()) the command: +# +# <filter> <input-file> +# +# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. -# Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. -# The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty or if -# non of the patterns match the file name, INPUT_FILTER is applied. +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. FILTER_PATTERNS = # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). +# INPUT_FILTER ) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. FILTER_SOURCE_FILES = NO # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file -# pattern. A pattern will override the setting for FILTER_PATTERN (if any) -# and it is also possible to disable source filtering for a specific pattern -# using *.ext= (so without naming a filter). This option only has effect when -# FILTER_SOURCE_FILES is enabled. +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. FILTER_SOURCE_PATTERNS = +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + #--------------------------------------------------------------------------- -# configuration options related to source browsing +# Configuration options related to source browsing #--------------------------------------------------------------------------- -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. SOURCE_BROWSER = NO -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. INLINE_SOURCES = NO -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C, C++ and Fortran comments will always remain visible. +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. STRIP_CODE_COMMENTS = YES -# If the REFERENCED_BY_RELATION tag is set to YES -# then for each documented function all documented -# functions referencing it will be listed. +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. REFERENCED_BY_RELATION = NO -# If the REFERENCES_RELATION tag is set to YES -# then for each documented function all documented entities -# called/used by that function will be listed. +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. REFERENCES_RELATION = NO -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. -# Otherwise they will link to the documentation. +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES, then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. REFERENCES_LINK_SOURCE = YES -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You -# will need version 4.8.6 or higher. +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. USE_HTAGS = NO -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. VERBATIM_HEADERS = NO #--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index +# Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. ALPHABETICAL_INDEX = NO -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. COLS_IN_ALPHA_INDEX = 5 -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. IGNORE_PREFIX = #--------------------------------------------------------------------------- -# configuration options related to the HTML output +# Configuration options related to the HTML output #--------------------------------------------------------------------------- -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. +# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output +# The default value is: YES. GENERATE_HTML = YES -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. HTML_OUTPUT = html -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. HTML_FILE_EXTENSION = .html -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. Note that when using a custom header you are responsible -# for the proper inclusion of any scripts and style sheets that doxygen -# needs, which is dependent on the configuration options used. -# It is advised to generate a default header using "doxygen -w html -# header.html footer.html stylesheet.css YourConfigFile" and then modify -# that header. Note that the header is subject to change so you typically -# have to redo this when upgrading to a newer version of doxygen or when -# changing the value of configuration settings such as GENERATE_TREEVIEW! +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. HTML_HEADER = @LV2_SRCDIR@/doc/header.html -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. HTML_FOOTER = -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. HTML_STYLESHEET = @LV2_SRCDIR@/doc/doxy-style.css +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user- +# defined cascading style sheet that is included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefor more robust against future updates. +# Doxygen will copy the style sheet file to the output directory. For an example +# see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these -# files. In the HTML_STYLESHEET file, use the file name only. Also note that -# the files will be copied as-is; there are no commands or markers available. +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. HTML_EXTRA_FILES = -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. -# Doxygen will adjust the colors in the style sheet and background images -# according to this color. Hue is specified as an angle on a colorwheel, -# see http://en.wikipedia.org/wiki/Hue for more information. -# For instance the value 0 represents red, 60 is yellow, 120 is green, -# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. -# The allowed range is 0 to 359. +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the stylesheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. HTML_COLORSTYLE_HUE = 160 -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of -# the colors in the HTML output. For a value of 0 the output will use -# grayscales only. A value of 255 will produce the most vivid colors. +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. HTML_COLORSTYLE_SAT = 60 -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to -# the luminance component of the colors in the HTML output. Values below -# 100 gradually make the output lighter, whereas values above 100 make -# the output darker. The value divided by 100 is the actual gamma applied, -# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, -# and 100 does not change the gamma. +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. HTML_COLORSTYLE_GAMMA = 100 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting -# this to NO can help when comparing the output of multiple runs. +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. HTML_DYNAMIC_SECTIONS = NO -# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of -# entries shown in the various tree structured indices initially; the user -# can expand and collapse entries dynamically later on. Doxygen will expand -# the tree to such a level that at most the specified number of entries are -# visible (unless a fully collapsed tree already exceeds this amount). -# So setting the number of entries 1 will produce a full collapsed tree by -# default. 0 is a special value representing an infinite number of entries -# and will result in a full expanded tree by default. +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. HTML_INDEX_NUM_ENTRIES = 100 -# If the GENERATE_DOCSET tag is set to YES, additional index files -# will be generated that can be used as input for Apple's Xcode 3 -# integrated development environment, introduced with OSX 10.5 (Leopard). -# To create a documentation set, doxygen will generate a Makefile in the -# HTML output directory. Running make will produce the docset in that -# directory and running "make install" will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find -# it at startup. -# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html # for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_DOCSET = NO -# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the -# feed. A documentation feed provides an umbrella under which multiple -# documentation sets from a single provider (such as a company or product suite) -# can be grouped. +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. DOCSET_FEEDNAME = "Doxygen generated docs" -# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that -# should uniquely identify the documentation set bundle. This should be a -# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen -# will append .docset to the name. +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify # the documentation publisher. This should be a reverse domain-name style # string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. DOCSET_PUBLISHER_ID = org.doxygen.Publisher -# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. DOCSET_PUBLISHER_NAME = Publisher -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) -# of the generated HTML documentation. +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_HTMLHELP = NO -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be # written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. CHM_FILE = -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler ( hhc.exe). If non-empty +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. HHC_LOCATION = -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). +# The GENERATE_CHI flag controls if a separate .chi index file is generated ( +# YES) or that it should be included in the master .chm file ( NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. GENERATE_CHI = NO -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING -# is used to encode HtmlHelp index (hhk), content (hhc) and project file -# content. +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. CHM_INDEX_ENCODING = -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. +# The BINARY_TOC flag controls whether a binary table of contents is generated ( +# YES) or a normal table of contents ( NO) in the .chm file. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. BINARY_TOC = NO -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. TOC_EXPAND = NO # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated -# that can be used as input for Qt's qhelpgenerator to generate a -# Qt Compressed Help (.qch) of the generated HTML documentation. +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_QHP = NO -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can -# be used to specify the file name of the resulting .qch file. -# The path specified is relative to the HTML output folder. +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. QCH_FILE = -# The QHP_NAMESPACE tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#namespace +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. QHP_NAMESPACE = -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#virtual-folders +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. QHP_VIRTUAL_FOLDER = doc -# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to -# add. For more information please see -# http://doc.trolltech.com/qthelpproject.html#custom-filters +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_NAME = -# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see -# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> -# Qt Help Project / Custom Filters</a>. +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's -# filter section matches. -# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> -# Qt Help Project / Filter Attributes</a>. +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = -# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can -# be used to specify the location of Qt's qhelpgenerator. -# If non-empty doxygen will try to run qhelpgenerator on the generated -# .qhp file. +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. QHG_LOCATION = -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files -# will be generated, which together with the HTML files, form an Eclipse help -# plugin. To install this plugin and make it available under the help contents -# menu in Eclipse, the contents of the directory containing the HTML and XML -# files needs to be copied into the plugins directory of eclipse. The name of -# the directory within the plugins directory should be the same as -# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before -# the help appears. +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_ECLIPSEHELP = NO -# A unique identifier for the eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have -# this name. +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. ECLIPSE_DOC_ID = org.doxygen.Project -# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) -# at top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. Since the tabs have the same information as the -# navigation tree you can set this option to NO if you already set -# GENERATE_TREEVIEW to YES. +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. DISABLE_INDEX = NO # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. -# If the tag value is set to YES, a side panel will be generated -# containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). -# Windows users are probably better off using the HTML help feature. -# Since the tree basically has the same information as the tab index you -# could consider to set DISABLE_INDEX to NO when enabling this option. +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_TREEVIEW = NO -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values -# (range [0,1..20]) that doxygen will group on one line in the generated HTML -# documentation. Note that a value of 0 will completely suppress the enum -# values from appearing in the overview section. +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. ENUM_VALUES_PER_LINE = 4 -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. TREEVIEW_WIDTH = 250 -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open -# links to external symbols imported via tag files in a separate window. +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. EXT_LINKS_IN_WINDOW = NO -# Use this tag to change the font size of Latex formulas included -# as images in the HTML documentation. The default is 10. Note that -# when you change the font size after a successful doxygen run you need -# to manually remove any form_*.png images from the HTML output directory -# to force them to be regenerated. +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. FORMULA_FONTSIZE = 10 # Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are -# not supported properly for IE 6.0, but are supported on all modern browsers. -# Note that when changing this option you need to delete any form_*.png files -# in the HTML output before the changes have effect. +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. FORMULA_TRANSPARENT = YES -# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax -# (see http://www.mathjax.org) which uses client side Javascript for the -# rendering instead of using prerendered bitmaps. Use this if you do not -# have LaTeX installed or if you want to formulas look prettier in the HTML -# output. When enabled you may also need to install MathJax separately and -# configure the path to it using the MATHJAX_RELPATH option. +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using prerendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. USE_MATHJAX = NO -# When MathJax is enabled you need to specify the location relative to the -# HTML output directory using the MATHJAX_RELPATH option. The destination -# directory should contain the MathJax.js script. For instance, if the mathjax -# directory is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to -# the MathJax Content Delivery Network so you can quickly see the result without -# installing MathJax. -# However, it is strongly recommended to install a local -# copy of MathJax from http://www.mathjax.org before deployment. +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest -# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension -# names that should be enabled during MathJax rendering. +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_EXTENSIONS = -# When the SEARCHENGINE tag is enabled doxygen will generate a search box -# for the HTML output. The underlying search engine uses javascript -# and DHTML and should work on any modern browser. Note that when using -# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets -# (GENERATE_DOCSET) there is already a search function so this one should -# typically be disabled. For large projects the javascript based search engine -# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use <access key> + S +# (what the <access key> is depends on the OS and browser, but it is typically +# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down +# key> to jump into the search results window, the results can be navigated +# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel +# the search. The filter options can be selected when the cursor is inside the +# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> +# to select a filter and <Enter> or <escape> to activate or cancel the filter +# option. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a PHP enabled web server instead of at the web client -# using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server -# based approach is that it scales better to large projects and allows -# full text search. The disadvantages are that it is more difficult to setup -# and does not have live searching capabilities. +# implemented using a web server instead of a web client using Javascript. There +# are two flavours of web server based searching depending on the +# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for +# searching and an index file used by the script. When EXTERNAL_SEARCH is +# enabled the indexing and searching needs to be provided by external tools. See +# the section "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. SERVER_BASED_SEARCH = NO +# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain the +# search results. +# +# Doxygen ships with an example indexer ( doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). +# +# See the section "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will return the search results when EXTERNAL_SEARCH is enabled. +# +# Doxygen ships with an example indexer ( doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Searching" for details. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. +# The default file is: searchdata.xml. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of +# to a relative location where the documentation can be found. The format is: +# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTRA_SEARCH_MAPPINGS = + #--------------------------------------------------------------------------- -# configuration options related to the LaTeX output +# Configuration options related to the LaTeX output #--------------------------------------------------------------------------- -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. +# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output. +# The default value is: YES. GENERATE_LATEX = NO -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. -# Note that when enabling USE_PDFLATEX this option is only used for -# generating bitmaps for formulas in the HTML output, but not in the -# Makefile that is written to the output directory. +# invoked. +# +# Note that when enabling USE_PDFLATEX this option is only used for generating +# bitmaps for formulas in the HTML output, but not in the Makefile that is +# written to the output directory. +# The default file is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate +# index for LaTeX. +# The default file is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. +# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. COMPACT_LATEX = NO -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# The PAPER_TYPE tag can be used to set the paper type that is used by the +# printer. +# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x +# 14 inches) and executive (7.25 x 10.5 inches). +# The default value is: a4. +# This tag requires that the tag GENERATE_LATEX is set to YES. PAPER_TYPE = a4wide -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. +# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names +# that should be included in the LaTeX output. To get the times font for +# instance you can specify +# EXTRA_PACKAGES=times +# If left blank no extra packages will be included. +# This tag requires that the tag GENERATE_LATEX is set to YES. EXTRA_PACKAGES = -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the +# generated LaTeX document. The header should contain everything until the first +# chapter. If it is left blank doxygen will generate a standard header. See +# section "Doxygen usage" for information on how to let doxygen write the +# default header to a separate file. +# +# Note: Only use a user-defined header if you know what you are doing! The +# following commands have a special meaning inside the header: $title, +# $datetime, $date, $doxygenversion, $projectname, $projectnumber. Doxygen will +# replace them by respectively the title of the page, the current date and time, +# only the current date, the version number of doxygen, the project name (see +# PROJECT_NAME), or the project number (see PROJECT_NUMBER). +# This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_HEADER = -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for -# the generated latex document. The footer should contain everything after -# the last chapter. If it is left blank doxygen will generate a -# standard footer. Notice: only use this tag if you know what you are doing! +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the +# generated LaTeX document. The footer should contain everything after the last +# chapter. If it is left blank doxygen will generate a standard footer. +# +# Note: Only use a user-defined footer if you know what you are doing! +# This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_FOOTER = -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the LATEX_OUTPUT output +# directory. Note that the files will be copied as-is; there are no commands or +# markers available. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_FILES = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is +# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will +# contain links (just like the HTML output) instead of page references. This +# makes the output suitable for online browsing using a PDF viewer. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. PDF_HYPERLINKS = NO -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a +# If the LATEX_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate +# the PDF file directly from the LaTeX files. Set this option to YES to get a # higher quality PDF documentation. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. USE_PDFLATEX = NO -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode +# command to the generated LaTeX files. This will instruct LaTeX to keep running +# if errors occur, instead of asking the user for help. This option is also used +# when generating formulas in HTML. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BATCHMODE = NO -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. +# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the +# index chapters (such as File Index, Compound Index, etc.) in the output. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_HIDE_INDICES = NO -# If LATEX_SOURCE_CODE is set to YES then doxygen will include -# source code with syntax highlighting in the LaTeX output. -# Note that which sources are shown also depends on other settings -# such as SOURCE_BROWSER. +# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source +# code with syntax highlighting in the LaTeX output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the -# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See -# http://en.wikipedia.org/wiki/BibTeX for more info. +# bibliography, e.g. plainnat, or ieeetr. See +# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# The default value is: plain. +# This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain #--------------------------------------------------------------------------- -# configuration options related to the RTF output +# Configuration options related to the RTF output #--------------------------------------------------------------------------- -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. +# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The +# RTF output is optimized for Word 97 and may not look too pretty with other RTF +# readers/editors. +# The default value is: NO. GENERATE_RTF = NO -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: rtf. +# This tag requires that the tag GENERATE_RTF is set to YES. RTF_OUTPUT = rtf -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. +# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. COMPACT_RTF = NO -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will +# contain hyperlink fields. The RTF file will contain links (just like the HTML +# output) instead of page references. This makes the output suitable for online +# browsing using Word or some other Word compatible readers that support those +# fields. +# +# Note: WordPad (write) and others do not support links. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. RTF_HYPERLINKS = NO -# Load style sheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's config +# file, i.e. a series of assignments. You only have to provide replacements, +# missing definitions are set to their default value. +# +# See also section "Doxygen usage" for information on how to generate the +# default style sheet that doxygen normally uses. +# This tag requires that the tag GENERATE_RTF is set to YES. RTF_STYLESHEET_FILE = -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. +# Set optional variables used in the generation of an RTF document. Syntax is +# similar to doxygen's config file. A template extensions file can be generated +# using doxygen -e rtf extensionFile. +# This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- -# configuration options related to the man page output +# Configuration options related to the man page output #--------------------------------------------------------------------------- -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages +# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for +# classes and files. +# The default value is: NO. GENERATE_MAN = NO -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. +# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. A directory man3 will be created inside the directory specified by +# MAN_OUTPUT. +# The default directory is: man. +# This tag requires that the tag GENERATE_MAN is set to YES. MAN_OUTPUT = man -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) +# The MAN_EXTENSION tag determines the extension that is added to the generated +# man pages. In case the manual section does not start with a number, the number +# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is +# optional. +# The default value is: .3. +# This tag requires that the tag GENERATE_MAN is set to YES. MAN_EXTENSION = .3 -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. +# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it +# will generate one additional man file for each entity documented in the real +# man page(s). These additional files only source the real man page, but without +# them the man command would be unable to find the correct page. +# The default value is: NO. +# This tag requires that the tag GENERATE_MAN is set to YES. MAN_LINKS = NO #--------------------------------------------------------------------------- -# configuration options related to the XML output +# Configuration options related to the XML output #--------------------------------------------------------------------------- -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. +# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that +# captures the structure of the code including all documentation. +# The default value is: NO. GENERATE_XML = NO -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. +# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: xml. +# This tag requires that the tag GENERATE_XML is set to YES. XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. +# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a +# validating XML parser to check the syntax of the XML files. +# This tag requires that the tag GENERATE_XML is set to YES. XML_SCHEMA = -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. +# The XML_DTD tag can be used to specify a XML DTD, which can be used by a +# validating XML parser to check the syntax of the XML files. +# This tag requires that the tag GENERATE_XML is set to YES. XML_DTD = -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. +# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program +# listings (including syntax highlighting and cross-referencing information) to +# the XML output. Note that enabling this will significantly increase the size +# of the XML output. +# The default value is: YES. +# This tag requires that the tag GENERATE_XML is set to YES. XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output +# Configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files +# that can be used to generate PDF. +# The default value is: NO. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. +# The default directory is: docbook. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- +# Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. +# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen +# Definitions (see http://autogen.sf.net) file that captures the structure of +# the code including all documentation. Note that this feature is still +# experimental and incomplete at the moment. +# The default value is: NO. GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- -# configuration options related to the Perl module output +# Configuration options related to the Perl module output #--------------------------------------------------------------------------- -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. +# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module +# file that captures the structure of the code including all documentation. +# +# Note that this feature is still experimental and incomplete at the moment. +# The default value is: NO. GENERATE_PERLMOD = NO -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. +# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary +# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI +# output from the Perl module output. +# The default value is: NO. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. PERLMOD_LATEX = NO -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. -# This is useful -# if you want to understand what is going on. -# On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely +# formatted so it can be parsed by a human reader. This is useful if you want to +# understand what is going on. On the other hand, if this tag is set to NO the +# size of the Perl module output will be much smaller and Perl will parse it +# just the same. +# The default value is: YES. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. PERLMOD_PRETTY = YES -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. +# The names of the make variables in the generated doxyrules.make file are +# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful +# so different doxyrules.make files included by the same Makefile don't +# overwrite each other's variables. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. PERLMOD_MAKEVAR_PREFIX = @@ -1487,106 +1905,128 @@ PERLMOD_MAKEVAR_PREFIX = # Configuration options related to the preprocessor #--------------------------------------------------------------------------- -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. +# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all +# C-preprocessor directives found in the sources and include files. +# The default value is: YES. ENABLE_PREPROCESSING = YES -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. +# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names +# in the source code. If set to NO only conditional compilation will be +# performed. Macro expansion can be done in a controlled way by setting +# EXPAND_ONLY_PREDEF to YES. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. MACRO_EXPANSION = NO -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_DEFINED tags. +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then +# the macro expansion is limited to the macros specified with the PREDEFINED and +# EXPAND_AS_DEFINED tags. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. EXPAND_ONLY_PREDEF = NO -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# pointed to by INCLUDE_PATH will be searched when a #include is found. +# If the SEARCH_INCLUDES tag is set to YES the includes files in the +# INCLUDE_PATH will be searched if a #include is found. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. SEARCH_INCLUDES = YES # The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. +# contain include files that are not input files but should be processed by the +# preprocessor. +# This tag requires that the tag SEARCH_INCLUDES is set to YES. INCLUDE_PATH = # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard # patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. +# directories. If left blank, the patterns specified with FILE_PATTERNS will be +# used. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. INCLUDE_FILE_PATTERNS = -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. +# The PREDEFINED tag can be used to specify one or more macro names that are +# defined before the preprocessor is started (similar to the -D option of e.g. +# gcc). The argument of the tag is a list of macros of the form: name or +# name=definition (no spaces). If the definition and the "=" are omitted, "=1" +# is assumed. To prevent a macro definition from being undefined via #undef or +# recursively expanded use the := operator instead of the = operator. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. PREDEFINED = -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition that -# overrules the definition found in the source code. +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this +# tag can be used to specify a list of macro names that should be expanded. The +# macro definition that is found in the sources will be used. Use the PREDEFINED +# tag if you want to use a different macro definition that overrules the +# definition found in the source code. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. EXPAND_AS_DEFINED = -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all references to function-like macros -# that are alone on a line, have an all uppercase name, and do not end with a -# semicolon, because these will confuse the parser if not removed. +# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will +# remove all refrences to function-like macros that are alone on a line, have an +# all uppercase name, and do not end with a semicolon. Such function macros are +# typically used for boiler-plate code, and will confuse the parser if not +# removed. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- -# Configuration::additions related to external references +# Configuration options related to external references #--------------------------------------------------------------------------- -# The TAGFILES option can be used to specify one or more tagfiles. For each -# tag file the location of the external documentation should be added. The -# format of a tag file without this location is as follows: -# +# The TAGFILES tag can be used to specify one or more tag files. For each tag +# file the location of the external documentation should be added. The format of +# a tag file without this location is as follows: # TAGFILES = file1 file2 ... # Adding location for the tag files is done as follows: -# # TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths -# or URLs. Note that each tag file must have a unique name (where the name does -# NOT include the path). If a tag file is not located in the directory in which -# doxygen is run, you must also specify the path to the tagfile here. +# where loc1 and loc2 can be relative or absolute paths or URLs. See the +# section "Linking to external documentation" for more information about the use +# of tag files. +# Note: Each tag file must have an unique name (where the name does NOT include +# the path). If a tag file is not located in the directory in which doxygen is +# run, you must also specify the path to the tagfile here. TAGFILES = -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. +# When a file name is specified after GENERATE_TAGFILE, doxygen will create a +# tag file that is based on the input files it reads. See section "Linking to +# external documentation" for more information about the usage of tag files. GENERATE_TAGFILE = tags -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. +# If the ALLEXTERNALS tag is set to YES all external class will be listed in the +# class index. If set to NO only the inherited external classes will be listed. +# The default value is: NO. ALLEXTERNALS = NO -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in +# the modules index. If set to NO, only the current project's groups will be +# listed. +# The default value is: YES. EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in +# the related pages index. If set to NO, only the current project's pages will +# be listed. +# The default value is: YES. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). +# interpreter (i.e. the result of 'which perl'). +# The default file (with absolute path) is: /usr/bin/perl. PERL_PATH = /usr/bin/perl @@ -1594,222 +2034,293 @@ PERL_PATH = /usr/bin/perl # Configuration options related to the dot tool #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option also works with HAVE_DOT disabled, but it is recommended to -# install and use dot, since it yields more powerful graphs. +# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram +# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to +# NO turns the diagrams off. Note that this option also works with HAVE_DOT +# disabled, but it is recommended to install and use dot, since it yields more +# powerful graphs. +# The default value is: YES. CLASS_DIAGRAMS = YES # You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see -# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# command. Doxygen will then run the mscgen tool (see: +# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the # documentation. The MSCGEN_PATH tag allows you to specify the directory where # the mscgen tool resides. If left empty the tool is assumed to be found in the # default search path. MSCGEN_PATH = -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide inheritance +# and usage relations if the target is undocumented or is not a class. +# The default value is: YES. HIDE_UNDOC_RELATIONS = YES # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) +# available from the path. This tool is part of Graphviz (see: +# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# Bell Labs. The other options in this section have no effect if this option is +# set to NO +# The default value is: NO. HAVE_DOT = NO -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is -# allowed to run in parallel. When set to 0 (the default) doxygen will -# base this on the number of processors available in the system. You can set it -# explicitly to a value larger than 0 to get control over the balance -# between CPU load and processing speed. +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed +# to run in parallel. When set to 0 doxygen will base this on the number of +# processors available in the system. You can set it explicitly to a value +# larger than 0 to get control over the balance between CPU load and processing +# speed. +# Minimum value: 0, maximum value: 32, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. DOT_NUM_THREADS = 0 -# By default doxygen will use the Helvetica font for all dot files that -# doxygen generates. When you want a differently looking font you can specify -# the font name using DOT_FONTNAME. You need to make sure dot is able to find -# the font, which can be done by putting it in a standard location or by setting -# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the -# directory containing the font. +# When you want a differently looking font n the dot files that doxygen +# generates you can specify the font name using DOT_FONTNAME. You need to make +# sure dot is able to find the font, which can be done by putting it in a +# standard location or by setting the DOTFONTPATH environment variable or by +# setting DOT_FONTPATH to the directory containing the font. +# The default value is: Helvetica. +# This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = -# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. -# The default size is 10pt. +# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of +# dot graphs. +# Minimum value: 4, maximum value: 24, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. DOT_FONTSIZE = 10 -# By default doxygen will tell dot to use the Helvetica font. -# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to -# set the path where dot can find it. +# By default doxygen will tell dot to use the default font as specified with +# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set +# the path where dot can find it using this tag. +# This tag requires that the tag HAVE_DOT is set to YES. DOT_FONTPATH = -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# CLASS_DIAGRAMS tag to NO. +# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for +# each documented class showing the direct and indirect inheritance relations. +# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. CLASS_GRAPH = YES -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. +# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a +# graph for each documented class showing the direct and indirect implementation +# dependencies (inheritance, containment, and class references variables) of the +# class with other documented classes. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. COLLABORATION_GRAPH = YES -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies +# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for +# groups, showing the direct groups dependencies. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. GROUP_GRAPHS = YES # If the UML_LOOK tag is set to YES doxygen will generate inheritance and # collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. UML_LOOK = NO -# If the UML_LOOK tag is enabled, the fields and methods are shown inside -# the class node. If there are many fields or methods and many nodes the -# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS -# threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be -# exceeded by 50% before the limit is enforced. +# If the UML_LOOK tag is enabled, the fields and methods are shown inside the +# class node. If there are many fields or methods and many nodes the graph may +# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the +# number of items for each type to make the size more manageable. Set this to 0 +# for no limit. Note that the threshold may be exceeded by 50% before the limit +# is enforced. So when you set the threshold to 10, up to 15 fields may appear, +# but if the number exceeds 15, the total amount of fields shown is limited to +# 10. +# Minimum value: 0, maximum value: 100, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. UML_LIMIT_NUM_FIELDS = 10 -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. +# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and +# collaboration graphs will show the relations between templates and their +# instances. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. TEMPLATE_RELATIONS = YES -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. +# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to +# YES then doxygen will generate a graph for each documented file showing the +# direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. INCLUDE_GRAPH = NO -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. +# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are +# set to YES then doxygen will generate a graph for each documented file showing +# the direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. INCLUDED_BY_GRAPH = NO -# If the CALL_GRAPH and HAVE_DOT options are set to YES then -# doxygen will generate a call dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable call graphs -# for selected functions only using the \callgraph command. +# If the CALL_GRAPH tag is set to YES then doxygen will generate a call +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. CALL_GRAPH = NO -# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then -# doxygen will generate a caller dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable caller -# graphs for selected functions only using the \callergraph command. +# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. CALLER_GRAPH = NO -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will generate a graphical hierarchy of all classes instead of a textual one. +# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical +# hierarchy of all classes instead of a textual one. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. GRAPHICAL_HIERARCHY = YES -# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. +# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the +# dependencies a directory has on other directories in a graphical way. The +# dependency relations are determined by the #include relations between the +# files in the directories. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are svg, png, jpg, or gif. -# If left blank png will be used. If you choose svg you need to set -# HTML_FILE_EXTENSION to xhtml in order to make the SVG files -# visible in IE 9+ (other browsers do not have this requirement). +# generated by dot. +# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order +# to make the SVG files visible in IE 9+ (other browsers do not have this +# requirement). +# Possible values are: png, jpg, gif and svg. +# The default value is: png. +# This tag requires that the tag HAVE_DOT is set to YES. DOT_IMAGE_FORMAT = png # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to # enable generation of interactive SVG images that allow zooming and panning. -# Note that this requires a modern browser other than Internet Explorer. -# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you -# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files -# visible. Older versions of IE do not have SVG support. +# +# Note that this requires a modern browser other than Internet Explorer. Tested +# and working are Firefox, Chrome, Safari, and Opera. +# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make +# the SVG files visible. Older versions of IE do not have SVG support. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. INTERACTIVE_SVG = NO -# The tag DOT_PATH can be used to specify the path where the dot tool can be +# The DOT_PATH tag can be used to specify the path where the dot tool can be # found. If left blank, it is assumed the dot tool can be found in the path. +# This tag requires that the tag HAVE_DOT is set to YES. DOT_PATH = # The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). +# contain dot files that are included in the documentation (see the \dotfile +# command). +# This tag requires that the tag HAVE_DOT is set to YES. DOTFILE_DIRS = # The MSCFILE_DIRS tag can be used to specify one or more directories that -# contain msc files that are included in the documentation (see the -# \mscfile command). +# contain msc files that are included in the documentation (see the \mscfile +# command). MSCFILE_DIRS = -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the -# number of direct children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note -# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes +# that will be shown in the graph. If the number of nodes in a graph becomes +# larger than this value, doxygen will truncate the graph, which is visualized +# by representing a node as a red box. Note that doxygen if the number of direct +# children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that +# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. +# Minimum value: 0, maximum value: 10000, default value: 50. +# This tag requires that the tag HAVE_DOT is set to YES. DOT_GRAPH_MAX_NODES = 50 -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs +# generated by dot. A depth value of 3 means that only nodes reachable from the +# root by following a path via at most 3 edges will be shown. Nodes that lay +# further from the root node will be omitted. Note that setting this option to 1 +# or 2 may greatly reduce the computation time needed for large code bases. Also +# note that the size of a graph can be further restricted by # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. +# Minimum value: 0, maximum value: 1000, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. MAX_DOT_GRAPH_DEPTH = 0 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not -# seem to support this out of the box. Warning: Depending on the platform used, -# enabling this option may lead to badly anti-aliased labels on the edges of -# a graph (i.e. they become hard to read). +# background. This is disabled by default, because dot on Windows does not seem +# to support this out of the box. +# +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. DOT_TRANSPARENT = NO # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output # files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. +# makes dot run faster, but since only newer versions of dot (>1.8.10) support +# this, this feature is disabled by default. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. DOT_MULTI_TARGETS = YES -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. +# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page +# explaining the meaning of the various boxes and arrows in the dot generated +# graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. +# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot +# files that are used to generate the various graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. DOT_CLEANUP = YES |