diff options
Diffstat (limited to 'doc/reference.doxygen.in')
| -rw-r--r-- | doc/reference.doxygen.in | 485 |
1 files changed, 337 insertions, 148 deletions
diff --git a/doc/reference.doxygen.in b/doc/reference.doxygen.in index d5608ca..5efb066 100644 --- a/doc/reference.doxygen.in +++ b/doc/reference.doxygen.in @@ -1,4 +1,4 @@ -# Doxyfile 1.8.15 +# Doxyfile 1.9.3 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -179,6 +179,16 @@ SHORT_NAMES = NO JAVADOC_AUTOBRIEF = YES +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -199,6 +209,14 @@ QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO +# By default Python docstrings are displayed as preformatted text and doxygen's +# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the +# doxygen's special commands can be used and the contents of the docstring +# documentation blocks is shown as doxygen documentation. +# The default value is: YES. + +PYTHON_DOCSTRING = YES + # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the # documentation from any documented member that it re-implements. # The default value is: YES. @@ -222,16 +240,16 @@ TAB_SIZE = 4 # the documentation. An alias has the form: # name=value # For example adding -# "sideeffect=@par Side Effects:\n" +# "sideeffect=@par Side Effects:^^" # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines (in the resulting output). You can put ^^ in the value part of an -# alias to insert a newline as if a physical newline was in the original file. -# When you need a literal { or } or , in the value part of an alias you have to -# escape them by means of a backslash (\), this can lead to conflicts with the -# commands \{ and \} for these it is advised to use the version @{ and @} or use -# a double escape (\\{ and \\}) +# "Side Effects:". Note that you cannot put \n's in the value part of an alias +# to insert newlines (in the resulting output). You can put ^^ in the value part +# of an alias to insert a newline as if a physical newline was in the original +# file. When you need a literal { or } or , in the value part of an alias you +# have to escape them by means of a backslash (\), this can lead to conflicts +# with the commands \{ and \} for these it is advised to use the version @{ and +# @} or use a double escape (\\{ and \\}) ALIASES = @@ -263,23 +281,34 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, -# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# language is one of the parsers supported by doxygen: IDL, Java, JavaScript, +# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice, +# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: # FortranFree, unknown formatted Fortran: Fortran. In the later case the parser # tries to guess whether the code is fixed or free formatted code, this is the -# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat -# .inc files as Fortran files (default is PHP), and .f files as C (default is -# Fortran), use: inc=Fortran f=C. +# default for Fortran type files). For instance to make doxygen treat .inc files +# as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # # Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. +# the files are not read by doxygen. When specifying no_extension you should add +# * to the FILE_PATTERNS. +# +# Note see also the list of default file extension mappings. EXTENSION_MAPPING = @@ -297,7 +326,7 @@ MARKDOWN_SUPPORT = YES # to that level are automatically included in the table of contents, even if # they do not have an id attribute. # Note: This feature currently applies only to Markdown headings. -# Minimum value: 0, maximum value: 99, default value: 0. +# Minimum value: 0, maximum value: 99, default value: 5. # This tag requires that the tag MARKDOWN_SUPPORT is set to YES. TOC_INCLUDE_HEADINGS = 0 @@ -413,6 +442,19 @@ TYPEDEF_HIDES_STRUCT = YES LOOKUP_CACHE_SIZE = 0 +# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use +# during processing. When set to 0 doxygen will based this on the number of +# cores available in the system. You can set it explicitly to a value larger +# than 0 to get more control over the balance between CPU load and processing +# speed. At this moment only the input processing can be done using multiple +# threads. Since this is still an experimental feature the default is set to 1, +# which effectively disables parallel processing. Please report any issues you +# encounter. Generating dot graphs in parallel is controlled by the +# DOT_NUM_THREADS setting. +# Minimum value: 0, maximum value: 32, default value: 1. + +NUM_PROC_THREADS = 1 + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- @@ -433,6 +475,12 @@ EXTRACT_ALL = NO EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -470,6 +518,13 @@ EXTRACT_LOCAL_METHODS = NO EXTRACT_ANON_NSPACES = NO +# If this flag is set to YES, the name of an unnamed parameter in a declaration +# will be determined by the corresponding definition. By default unnamed +# parameters remain unnamed in the output. +# The default value is: YES. + +RESOLVE_UNNAMED_PARAMS = YES + # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all # undocumented members inside documented classes or files. If set to NO these # members will be included in the various overviews, but no documentation @@ -487,8 +542,8 @@ HIDE_UNDOC_MEMBERS = NO HIDE_UNDOC_CLASSES = NO # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# (class|struct|union) declarations. If set to NO, these declarations will be -# included in the documentation. +# declarations. If set to NO, these declarations will be included in the +# documentation. # The default value is: NO. HIDE_FRIEND_COMPOUNDS = NO @@ -507,11 +562,18 @@ HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = NO -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES, upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# With the correct setting of option CASE_SENSE_NAMES doxygen will better be +# able to match the capabilities of the underlying filesystem. In case the +# filesystem is case sensitive (i.e. it supports files in the same directory +# whose names only differ in casing), the option must be set to YES to properly +# deal with such files in case they appear in the input. For filesystems that +# are not case sensitive the option should be be set to NO to properly deal with +# output files written for symbols that only differ in casing, such as for two +# classes, one named CLASS and the other named Class, and to also support +# references to files without having to specify the exact matching casing. On +# Windows (including Cygwin) and MacOS, users should typically set this option +# to NO, whereas on Linux or other Unix flavors it should typically be set to +# YES. # The default value is: system dependent. CASE_SENSE_NAMES = YES @@ -530,6 +592,12 @@ HIDE_SCOPE_NAMES = NO HIDE_COMPOUND_REFERENCE= NO +# If the SHOW_HEADERFILE tag is set to YES then the documentation for a class +# will show which file needs to be included to use the class. +# The default value is: YES. + +SHOW_HEADERFILE = YES + # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. @@ -687,7 +755,8 @@ FILE_VERSION_FILTER = # output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. You can # optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. +# will be used as the name of the layout file. See also section "Changing the +# layout of pages" for information. # # Note that if you run doxygen from a directory containing a file called # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE @@ -733,24 +802,35 @@ WARNINGS = YES WARN_IF_UNDOCUMENTED = YES # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some parameters -# in a documented function, or documenting parameters that don't exist or using -# markup commands wrongly. +# potential errors in the documentation, such as documenting some parameters in +# a documented function twice, or documenting parameters that don't exist or +# using markup commands wrongly. # The default value is: YES. WARN_IF_DOC_ERROR = YES +# If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete +# function parameter documentation. If set to NO, doxygen will accept that some +# parameters have no documentation without warning. +# The default value is: YES. + +WARN_IF_INCOMPLETE_DOC = YES + # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. If -# EXTRACT_ALL is set to YES then this flag will automatically be disabled. +# value. If set to NO, doxygen will only warn about wrong parameter +# documentation, but not about the absence of documentation. If EXTRACT_ALL is +# set to YES then this flag will automatically be disabled. See also +# WARN_IF_INCOMPLETE_DOC # The default value is: NO. WARN_NO_PARAMDOC = NO # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when -# a warning is encountered. +# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS +# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but +# at the end of the doxygen process doxygen will return with a non-zero status. +# Possible values are: NO, YES and FAIL_ON_WARNINGS. # The default value is: NO. WARN_AS_ERROR = NO @@ -767,7 +847,10 @@ WARN_FORMAT = "$file:$line: $text" # The WARN_LOGFILE tag can be used to specify a file to which warning and error # messages should be written. If left blank the output is written to standard -# error (stderr). +# error (stderr). In case the file specified cannot be opened for writing the +# warning and error messages are written to standard error. When as file - is +# specified the warning and error messages are written to standard output +# (stdout). WARN_LOGFILE = @@ -814,8 +897,8 @@ INPUT = @LV2_SRCDIR@/doc/mainpage.md \ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: https://www.gnu.org/software/libiconv/) for the list of -# possible encodings. +# documentation (see: +# https://www.gnu.org/software/libiconv/) for the list of possible encodings. # The default value is: UTF-8. INPUT_ENCODING = UTF-8 @@ -828,11 +911,15 @@ INPUT_ENCODING = UTF-8 # need to set EXTENSION_MAPPING for the extension otherwise the files are not # read by doxygen. # +# Note the list of default checked file patterns might differ from the list of +# default file extension mappings. +# # If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, # *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, -# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, -# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, -# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. +# *.hh, *.hxx, *.hpp, *.h++, *.l, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, +# *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C +# comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, +# *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = @@ -871,7 +958,7 @@ EXCLUDE_PATTERNS = # (namespaces, classes, functions, etc.) that should be excluded from the # output. The symbol name can be a fully qualified name, a word, or if the # wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test +# ANamespace::AClass, ANamespace::*Test # # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories use the pattern */test/* @@ -1156,7 +1243,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to -# this color. Hue is specified as an angle on a colorwheel, see +# this color. Hue is specified as an angle on a color-wheel, see # https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. @@ -1166,7 +1253,7 @@ HTML_EXTRA_FILES = HTML_COLORSTYLE_HUE = 160 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors -# in the HTML output. For a value of 0 the output will use grayscales only. A +# in the HTML output. For a value of 0 the output will use gray-scales only. A # value of 255 will produce the most vivid colors. # Minimum value: 0, maximum value: 255, default value: 100. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1195,9 +1282,9 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML # documentation will contain a main index with vertical navigation menus that -# are dynamically created via Javascript. If disabled, the navigation index will +# are dynamically created via JavaScript. If disabled, the navigation index will # consists of multiple levels of tabs that are statically embedded in every HTML -# page. Disable this option to support browsers that do not have Javascript, +# page. Disable this option to support browsers that do not have JavaScript, # like the Qt help browser. # The default value is: YES. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1227,10 +1314,11 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: https://developer.apple.com/xcode/), introduced with OSX -# 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in +# environment (see: +# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To +# create a documentation set, doxygen will generate a Makefile in the HTML +# output directory. Running make will produce the docset in that directory and +# running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at # startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy # genXcode/_index.html for more information. @@ -1247,6 +1335,13 @@ GENERATE_DOCSET = NO DOCSET_FEEDNAME = "Doxygen generated docs" +# This tag determines the URL of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDURL = + # This tag specifies a string that should uniquely identify the documentation # set bundle. This should be a reverse domain-name style string, e.g. # com.mycompany.MyDocSet. Doxygen will append .docset to the name. @@ -1272,8 +1367,12 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. +# on Windows. In the beginning of 2021 Microsoft took the original page, with +# a.o. the download links, offline the HTML help workshop was already many years +# in maintenance mode). You can download the HTML help workshop from the web +# archives at Installation executable (see: +# http://web.archive.org/web/20160201063255/http://download.microsoft.com/downlo +# ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe). # # The HTML Help Workshop contains a compiler that can convert all HTML output # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML @@ -1303,7 +1402,7 @@ CHM_FILE = HHC_LOCATION = # The GENERATE_CHI flag controls if a separate .chi index file is generated -# (YES) or that it should be included in the master .chm file (NO). +# (YES) or that it should be included in the main .chm file (NO). # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1348,7 +1447,8 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). +# (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1356,8 +1456,8 @@ QHP_NAMESPACE = # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- -# folders). +# Folders (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1365,30 +1465,30 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. +# The QHG_LOCATION tag can be used to specify the location (absolute path +# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to +# run qhelpgenerator on the generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. QHG_LOCATION = @@ -1431,16 +1531,28 @@ DISABLE_INDEX = NO # to work a browser that supports JavaScript, DHTML, CSS and frames is required # (i.e. any modern browser). Windows users are probably better off using the # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can -# further fine-tune the look of the index. As an example, the default style -# sheet generated by doxygen has an example that shows how to put an image at -# the root of the tree instead of the PROJECT_NAME. Since the tree basically has -# the same information as the tab index, you could consider setting -# DISABLE_INDEX to YES when enabling this option. +# further fine tune the look of the index (see "Fine-tuning the output"). As an +# example, the default style sheet generated by doxygen has an example that +# shows how to put an image at the root of the tree instead of the PROJECT_NAME. +# Since the tree basically has the same information as the tab index, you could +# consider setting DISABLE_INDEX to YES when enabling this option. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_TREEVIEW = NO +# When both GENERATE_TREEVIEW and DISABLE_INDEX are set to YES, then the +# FULL_SIDEBAR option determines if the side bar is limited to only the treeview +# area (value NO) or if it should extend to the full height of the window (value +# YES). Setting this to YES gives a layout similar to +# https://docs.readthedocs.io with more room for contents, but less room for the +# project logo, title, and description. If either GENERATE_TREEVIEW or +# DISABLE_INDEX is set to NO, this option has no effect. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FULL_SIDEBAR = NO + # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that # doxygen will group on one line in the generated HTML documentation. # @@ -1465,6 +1577,24 @@ TREEVIEW_WIDTH = 250 EXT_LINKS_IN_WINDOW = NO +# If the OBFUSCATE_EMAILS tag is set to YES, doxygen will obfuscate email +# addresses. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +OBFUSCATE_EMAILS = YES + +# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg +# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see +# https://inkscape.org) to generate formulas as SVG images instead of PNGs for +# the HTML output. These images will generally look nicer at scaled resolutions. +# Possible values are: png (the default) and svg (looks nicer but requires the +# pdf2svg or inkscape tool). +# The default value is: png. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FORMULA_FORMAT = png + # Use this tag to change the font size of LaTeX formulas included as images in # the HTML documentation. When you change the font size after a successful # doxygen run you need to manually remove any form_*.png images from the HTML @@ -1485,8 +1615,14 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES +# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands +# to create new LaTeX commands to be used in formulas as building blocks. See +# the section "Including formulas" for details. + +FORMULA_MACROFILE = + # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# https://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side JavaScript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1496,11 +1632,29 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO +# With MATHJAX_VERSION it is possible to specify the MathJax version to be used. +# Note that the different versions of MathJax have different requirements with +# regards to the different settings, so it is possible that also other MathJax +# settings have to be changed when switching between the different MathJax +# versions. +# Possible values are: MathJax_2 and MathJax_3. +# The default value is: MathJax_2. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_VERSION = MathJax_2 + # When MathJax is enabled you can set the default output format to be used for -# the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. +# the MathJax output. For more details about the output format see MathJax +# version 2 (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) and MathJax version 3 +# (see: +# http://docs.mathjax.org/en/latest/web/components/output.html). # Possible values are: HTML-CSS (which is slower, but has the best -# compatibility), NativeMML (i.e. MathML) and SVG. +# compatibility. This is the name for Mathjax version 2, for MathJax version 3 +# this will be translated into chtml), NativeMML (i.e. MathML. Only supported +# for NathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This +# is the name for Mathjax version 3, for MathJax version 2 this will be +# translated into HTML-CSS) and SVG. # The default value is: HTML-CSS. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1513,22 +1667,29 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from https://www.mathjax.org before deployment. -# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. +# MathJax from https://www.mathjax.org before deployment. The default value is: +# - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2 +# - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3 # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax # extension names that should be enabled during MathJax rendering. For example +# for MathJax version 2 (see +# https://docs.mathjax.org/en/v2.7-latest/tex.html#tex-and-latex-extensions): # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# For example for MathJax version 3 (see +# http://docs.mathjax.org/en/latest/input/tex/extensions/index.html): +# MATHJAX_EXTENSIONS = ams # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_EXTENSIONS = # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces # of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an # example see the documentation. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1556,7 +1717,7 @@ MATHJAX_CODEFILE = SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a web server instead of a web client using Javascript. There +# implemented using a web server instead of a web client using JavaScript. There # are two flavors of web server based searching depending on the EXTERNAL_SEARCH # setting. When disabled, doxygen will generate a PHP script for searching and # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing @@ -1575,7 +1736,8 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: https://xapian.org/). +# Xapian (see: +# https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1588,8 +1750,9 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: https://xapian.org/). See the section "External Indexing and -# Searching" for details. +# Xapian (see: +# https://xapian.org/). See the section "External Indexing and Searching" for +# details. # This tag requires that the tag SEARCHENGINE is set to YES. SEARCHENGINE_URL = @@ -1659,6 +1822,16 @@ LATEX_CMD_NAME = latex MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1688,29 +1861,31 @@ PAPER_TYPE = a4 EXTRA_PACKAGES = -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the -# generated LaTeX document. The header should contain everything until the first -# chapter. If it is left blank doxygen will generate a standard header. See -# section "Doxygen usage" for information on how to let doxygen write the -# default header to a separate file. +# The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for +# the generated LaTeX document. The header should contain everything until the +# first chapter. If it is left blank doxygen will generate a standard header. It +# is highly recommended to start with a default header using +# doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty +# and then modify the file new_header.tex. See also section "Doxygen usage" for +# information on how to generate the default header that doxygen normally uses. # -# Note: Only use a user-defined header if you know what you are doing! The -# following commands have a special meaning inside the header: $title, -# $datetime, $date, $doxygenversion, $projectname, $projectnumber, -# $projectbrief, $projectlogo. Doxygen will replace $title with the empty -# string, for the replacement values of the other commands the user is referred -# to HTML_HEADER. +# Note: Only use a user-defined header if you know what you are doing! +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. The following +# commands have a special meaning inside the header (and footer): For a +# description of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_HEADER = -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the -# generated LaTeX document. The footer should contain everything after the last -# chapter. If it is left blank doxygen will generate a standard footer. See +# The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for +# the generated LaTeX document. The footer should contain everything after the +# last chapter. If it is left blank doxygen will generate a standard footer. See # LATEX_HEADER for more information on how to generate a default footer and what -# special commands can be used inside the footer. -# -# Note: Only use a user-defined footer if you know what you are doing! +# special commands can be used inside the footer. See also section "Doxygen +# usage" for information on how to generate the default footer that doxygen +# normally uses. Note: Only use a user-defined footer if you know what you are +# doing! # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_FOOTER = @@ -1743,9 +1918,11 @@ LATEX_EXTRA_FILES = PDF_HYPERLINKS = YES -# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate -# the PDF file directly from the LaTeX files. Set this option to YES, to get a -# higher quality PDF documentation. +# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as +# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX +# files. Set this option to YES, to get a higher quality PDF documentation. +# +# See also section LATEX_CMD_NAME for selecting the engine. # The default value is: YES. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1753,8 +1930,7 @@ USE_PDFLATEX = YES # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode # command to the generated LaTeX files. This will instruct LaTeX to keep running -# if errors occur, instead of asking the user for help. This option is also used -# when generating formulas in HTML. +# if errors occur, instead of asking the user for help. # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1767,16 +1943,6 @@ LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO -# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source -# code with syntax highlighting in the LaTeX output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_SOURCE_CODE = NO - # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See # https://en.wikipedia.org/wiki/BibTeX and \cite for more info. @@ -1793,6 +1959,14 @@ LATEX_BIB_STYLE = plain LATEX_TIMESTAMP = NO +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1849,16 +2023,6 @@ RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = -# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code -# with syntax highlighting in the RTF output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_SOURCE_CODE = NO - #--------------------------------------------------------------------------- # Configuration options related to the man page output #--------------------------------------------------------------------------- @@ -1930,6 +2094,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1948,15 +2119,6 @@ GENERATE_DOCBOOK = NO DOCBOOK_OUTPUT = docbook -# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the -# program listings (including syntax highlighting and cross-referencing -# information) to the DOCBOOK output. Note that enabling this will significantly -# increase the size of the DOCBOOK output. -# The default value is: NO. -# This tag requires that the tag GENERATE_DOCBOOK is set to YES. - -DOCBOOK_PROGRAMLISTING = NO - #--------------------------------------------------------------------------- # Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -2135,15 +2297,6 @@ EXTERNAL_PAGES = YES # Configuration options related to the dot tool #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram -# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to -# NO turns the diagrams off. Note that this option also works with HAVE_DOT -# disabled, but it is recommended to install and use dot, since it yields more -# powerful graphs. -# The default value is: YES. - -CLASS_DIAGRAMS = YES - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2200,11 +2353,14 @@ DOT_FONTSIZE = 10 DOT_FONTPATH = -# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for -# each documented class showing the direct and indirect inheritance relations. -# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# If the CLASS_GRAPH tag is set to YES (or GRAPH) then doxygen will generate a +# graph for each documented class showing the direct and indirect inheritance +# relations. In case HAVE_DOT is set as well dot will be used to draw the graph, +# otherwise the built-in generator will be used. If the CLASS_GRAPH tag is set +# to TEXT the direct and indirect inheritance relations will be shown as texts / +# links. +# Possible values are: NO, YES, TEXT and GRAPH. # The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. CLASS_GRAPH = YES @@ -2241,10 +2397,32 @@ UML_LOOK = NO # but if the number exceeds 15, the total amount of fields shown is limited to # 10. # Minimum value: 0, maximum value: 100, default value: 10. -# This tag requires that the tag HAVE_DOT is set to YES. +# This tag requires that the tag UML_LOOK is set to YES. UML_LIMIT_NUM_FIELDS = 10 +# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and +# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS +# tag is set to YES, doxygen will add type and arguments for attributes and +# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen +# will not generate fields with class member information in the UML graphs. The +# class diagrams will look similar to the default class diagrams but using UML +# notation for the relationships. +# Possible values are: NO, YES and NONE. +# The default value is: NO. +# This tag requires that the tag UML_LOOK is set to YES. + +DOT_UML_DETAILS = NO + +# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters +# to display on a single line. If the actual line length exceeds this threshold +# significantly it will wrapped across multiple lines. Some heuristics are apply +# to avoid ugly line breaks. +# Minimum value: 0, maximum value: 1000, default value: 17. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_WRAP_THRESHOLD = 17 + # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and # collaboration graphs will show the relations between templates and their # instances. @@ -2311,6 +2489,13 @@ GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = NO +# The DIR_GRAPH_MAX_DEPTH tag can be used to limit the maximum number of levels +# of child directories generated in directory dependency graphs by dot. +# Minimum value: 1, maximum value: 25, default value: 1. +# This tag requires that the tag DIRECTORY_GRAPH is set to YES. + +DIR_GRAPH_MAX_DEPTH = 1 + # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. For an explanation of the image formats see the section # output formats in the documentation of the dot tool (Graphviz (see: @@ -2364,10 +2549,10 @@ MSCFILE_DIRS = DIAFILE_DIRS = # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the -# path where java can find the plantuml.jar file. If left blank, it is assumed -# PlantUML is not used or called during a preprocessing step. Doxygen will -# generate a warning when it encounters a \startuml command in this case and -# will not generate output for the diagram. +# path where java can find the plantuml.jar file or to the filename of jar file +# to be used. If left blank, it is assumed PlantUML is not used or called during +# a preprocessing step. Doxygen will generate a warning when it encounters a +# \startuml command in this case and will not generate output for the diagram. PLANTUML_JAR_PATH = @@ -2429,14 +2614,18 @@ DOT_MULTI_TARGETS = YES # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page # explaining the meaning of the various boxes and arrows in the dot generated # graphs. +# Note: This tag requires that UML_LOOK isn't set, i.e. the doxygen internal +# graphical representation for inheritance and collaboration diagrams is used. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate # files that are used to generate the various graphs. +# +# Note: This setting is not only used for dot files but also for msc temporary +# files. # The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. DOT_CLEANUP = YES |