aboutsummaryrefslogtreecommitdiffstats
path: root/lv2/lv2plug.in/ns/ext/port-props
diff options
context:
space:
mode:
Diffstat (limited to 'lv2/lv2plug.in/ns/ext/port-props')
-rw-r--r--lv2/lv2plug.in/ns/ext/port-props/manifest.ttl2
-rw-r--r--lv2/lv2plug.in/ns/ext/port-props/port-props.ttl33
2 files changed, 22 insertions, 13 deletions
diff --git a/lv2/lv2plug.in/ns/ext/port-props/manifest.ttl b/lv2/lv2plug.in/ns/ext/port-props/manifest.ttl
index 56fbeb0..2009434 100644
--- a/lv2/lv2plug.in/ns/ext/port-props/manifest.ttl
+++ b/lv2/lv2plug.in/ns/ext/port-props/manifest.ttl
@@ -4,5 +4,5 @@
<http://lv2plug.in/ns/ext/port-props>
a lv2:Specification ;
lv2:minorVersion 1 ;
- lv2:microVersion 0 ;
+ lv2:microVersion 1 ;
rdfs:seeAlso <port-props.ttl> .
diff --git a/lv2/lv2plug.in/ns/ext/port-props/port-props.ttl b/lv2/lv2plug.in/ns/ext/port-props/port-props.ttl
index bdb049a..ea87acb 100644
--- a/lv2/lv2plug.in/ns/ext/port-props/port-props.ttl
+++ b/lv2/lv2plug.in/ns/ext/port-props/port-props.ttl
@@ -12,6 +12,15 @@
rdfs:seeAlso <../../meta/meta.ttl> ;
doap:name "LV2 Port Properties" ;
doap:release [
+ doap:revision "1.1" ;
+ doap:created "2012-07-29" ;
+ dcs:blame <http://drobilla.net/drobilla#me> ;
+ dcs:changeset [
+ dcs:item [
+ rdfs:label "Use consistent label style."
+ ]
+ ]
+ ] , [
doap:revision "1.0" ;
doap:created "2012-04-17" ;
doap:file-release <http://lv2plug.in/spec/lv2-1.0.0.tar.bz2> ;
@@ -35,7 +44,7 @@ functionality.</p>
pprops:trigger
a lv2:PortProperty ;
- rdfs:label "Trigger" ;
+ rdfs:label "trigger" ;
rdfs:comment """
Indicates that the data item corresponds to a momentary event that has been
detected (control output ports) or is to be triggered (control input ports).
@@ -49,7 +58,7 @@ is also lv2:integer.
pprops:supportsStrictBounds
a lv2:Feature ;
- rdfs:label "Supports strict bounds" ;
+ rdfs:label "supports strict bounds" ;
rdfs:comment """
Indicates use of host support for pprops:hasStrictBounds port property. A
plugin that specifies it as optional feature can omit value clamping for
@@ -60,7 +69,7 @@ input ports that have a pprops:hasStrictBounds property.
pprops:hasStrictBounds
a lv2:PortProperty ;
- rdfs:label "Has strict bounds" ;
+ rdfs:label "has strict bounds" ;
rdfs:comment """
For hosts that support pprops:supportsStrictBounds, this indicates that the
value of the port should never exceed the port's minimum and maximum control
@@ -73,7 +82,7 @@ implementation.
pprops:expensive
a lv2:PortProperty ;
- rdfs:label "Changes trigger expensive calculation" ;
+ rdfs:label "changes are expensive" ;
rdfs:comment """
Input ports only. Indicates that any changes to the port value may trigger
expensive background calculation (e.g. regenerate some lookup tables in a
@@ -86,7 +95,7 @@ connection targets or for automation by default.
pprops:causesArtifacts
a lv2:PortProperty ;
- rdfs:label "May cause audio artifacts when changed" ;
+ rdfs:label "changes cause artifacts" ;
rdfs:comment """
Input ports only. Indicates that any changes to the port value may produce
slight artifacts to produced audio signals (zipper noise and other results of
@@ -97,7 +106,7 @@ ports may be marked as artifact-producing.
pprops:continuousCV
a lv2:PortProperty ;
- rdfs:label "Carries a smooth modulation signal" ;
+ rdfs:label "smooth modulation signal" ;
rdfs:comment """
Indicates that the port carries a "smooth" modulation signal. Control input
ports of this type are well-suited for being connected to sources of smooth
@@ -111,7 +120,7 @@ considered points along a curve).
pprops:discreteCV
a lv2:PortProperty ;
- rdfs:label "Carries a discrete modulation signal" ;
+ rdfs:label "discrete modulation signal" ;
rdfs:comment """
Indicates that the port carries a "discrete" modulation signal. Input ports of
this type are well-suited for being connected to sources of discrete signals
@@ -123,7 +132,7 @@ points along a curve).
pprops:logarithmic
a lv2:PortProperty ;
- rdfs:label "Port value uses a logarithmic scale" ;
+ rdfs:label "logarithmic scale" ;
rdfs:comment """
Indicates that port value behaviour within specified range (bounds) is a value
using logarithmic scale. The lower and upper bounds must be specified, and
@@ -132,7 +141,7 @@ must be of the same sign.
pprops:notAutomatic
a lv2:PortProperty ;
- rdfs:label "Port is not intended as a CV input" ;
+ rdfs:label "not intended as a CV input" ;
rdfs:comment """
Indicates that the port is not primarily intended to be fed with modulation
signals from external sources (other plugins, etc.). It is merely a UI hint
@@ -141,7 +150,7 @@ and hosts may allow the user to override it.
pprops:notOnGUI
a lv2:PortProperty ;
- rdfs:label "Port is not to be displayed on a GUI or equivalent" ;
+ rdfs:label "not on GUI" ;
rdfs:comment """
Indicates that the port is not primarily intended to be represented by a
separate control in the user interface window (or any similar mechanism used
@@ -153,7 +162,7 @@ pprops:displayPriority
a rdf:Property ;
rdfs:domain lv2:Port ;
rdfs:range xsd:nonNegativeInteger ;
- rdfs:label "Display priority" ;
+ rdfs:label "display priority" ;
rdfs:comment """
Indicates how important a port is to controlling the plugin. If a host can
only display some ports of a plugin, it should prefer ports with a higher
@@ -165,7 +174,7 @@ pprops:rangeSteps
a rdf:Property ;
rdfs:domain lv2:Port ;
rdfs:range xsd:nonNegativeInteger ;
- rdfs:label "Number of value quantization steps" ;
+ rdfs:label "number of value steps" ;
lv2:documentation """
<p>This value indicates into how many evenly-divided points the (control) port
range should be divided for step-wise control. This may be used for changing